Do you know how plumbing works in your home? If not, you’re not alone. According to our plumbing experts from Shah Alam, plumbing is one of those things that most people take for granted until it’s too late and they are left with a flooded basement or water damage to their walls.
Unfortunately, many homeowners don’t have enough knowledge about plumbing to even understand what needs repair or replacement first.
In this blog post, we will explore the different parts of your home’s plumbing system and how they work together to keep everything running smoothly!
Table of Contents
Water Supply System
A house wouldn’t be functioning well without a water system. You wouldn’t be able to take a bath, drink water, wash plates or water your plants without a steady supply of water.
But what makes all of these things possible? Well,, for starters, if your water supply! You need a water supply system to get the water from your home’s main entrance up into each fixture,, such as the bathroom and the kitchen.
The water supply system consists of pipes that connect to one another in order to effectively distribute water to different areas of the house.
The pipes can be copper, galvanized steel, or copper-clad stainless steel,, and they vary in size depending on how much pressure is needed for each fixture.
A typical home will have a main supply pipe that extends over 30 feet into the ground, where it connects to an underground well or city water line. From there, this single pipe splits off into many smaller lines (called branches), which are distributed throughout your property.
The amount of “splitting” varies from homeowner to homeowner as some people don’t need more than one branch while others may require six! With so many branches running through your plumbing system, you want them all working properly so that nothing runs out of water during a bath or when washing dishes.
You may be wondering what happens to the water after you drain them out of your tub. It can be icky if you think about it too long, but that water has to go somewhere!
The drain-waste system is what’s responsible for taking your dirty bathwater and dumping it out of the house. The pipes in this system carry wastewater away from fixtures such as sinks and toilets.
It starts by collecting all debris – hair, toilet paper, food particles etc. – which then goes into an airtight pipe called a trap that prevents sewer gases from reaching inside your home. This dirt collects at the bottom of the pipe where a the sump pump removes any excess liquid so they can be taken outside through a cleanout or “clean point.”
On the other hand, water from your toilet after flushing or after washing dishes in the sink will often go to a septic tank or a public sewer system. A septic tank is a tank located outside of your house that is connected to the drain-waste system, while a public sewer system connects directly into city sewage.
It’s vital to keep all your drain-waste systems properly maintained and up-to-date so that you avoid any plumbing disasters like clogs and leaks.
Maintaining Your Plumbing Systems
Your plumbing system is a vital aspect of your house that makes things easier. Without it, you would be stuck doing things the old fashioned way, like taking water from a well! There are many parts that make up your plumbing system, and it is important to keep them maintained at all times.
The first thing you should remember to do is have a plumber come over for an inspection of your current system. They will check if there are any leaks, clogs or other issues with your pipes and faucets. If there’s anything wrong, they’ll let you know so that they can fix it before something catastrophic happens, such as flooding or water damage in walls from excess pressure on the pipes causing cracks in the wallboard.
Once everything has been inspected then here are some tips to follow:
- Keep lids closed when not using sinks, toilets, tubs etc.; This helps to prevent children from turning on the water and wasting it.
- If your pipes are making a lot of noise or you notice that one has become loose, then call for repairs immediately as there may be an issue with them; A noisy pipe can mean possible damage within the system, which will lead to further problems down the line such as loss of pressure in certain fixtures.
- Don’t turn off any faucet until all water is drained out. This prevents clogs in your drain waste systems or air from getting trapped inside the plumbing lines causing leaks.
- Never attempt DIY plumbing repairs unless you have the proper training and certifications as it can be dangerous!
- If your water becomes discolored or cloudy, this means that there are minerals in it. These usually come from older pipes that need to be replaced.
- Replace old appliances with new ones (ex: toilets) for efficiency; Old fixtures often use more water and energy than newer ones.
The importance of knowing how plumbing works in your home cannot be overstated. Not only does it keep your family safe from potential hazards, but it also saves you the cost and hassle of seeking professional help for every small leak or clog that comes along.
Learning about the different parts of a water system, what they do, and how they work will make getting through an emergency much easier too. If you ever need help with your plumbing systems, don’t hesitate to call us so we can help!