Your pipe joints at home are probably leaking, and that’s probably why you have come into this article trying to look for ways how you can stop it.
A leaking pipe joint can be stopped by doing necessary repairs, like tightening the joints or reconnecting the lines again like how it was done the first time. But if there’s any way you can do to prevent leaks, that will be better than waiting for a leak to happen.
So, how do you make leak-free connections? How do you stop leaks in pipe joints in Kuala Lumpur?
First things first. What materials will you be needing? Before you go ahead and ensure you have leak-free connections at home, be sure that you have the following:
- Adjustable wrench
- Wrench set
- Slip joint pliers
- Teflon tape
- Teflon pipe joint compound
So now that you have secured the above tools and materials, you can now start becoming an expert plumber yourself.
But wait, there’s more. Pipes are made to have different types depending on the purpose they serve. In this article, we’ll make sure to give you tips for each type of pipe joint, namely: threaded, compression, and slip joints. Although all these are meant to prevent leaks, you can also apply these to stop your pipe joints from leaking.
P.S. Looking for a plumber to assist you? You can book a Kuala Lumpur plumber here.
Tips for Each Type of Pipe Joint
What are threaded joints, and how will you know if you have one?
Threaded joints are the most common type of detachable joint used to connect two or more components using various, standardized fasteners.
Being the most common, you probably know already how to connect these together, but making sure it does not leak is a different story.
To make sure your threaded joints don’t start leaking, you may consider using two different types of Teflon. First, identify the male thread of the pipe, and wrap it with Teflon tape. Make sure that you wrap the threaded end facing you in a clockwise manner. Wrap the threaded end of up to three layers, but you may find it necessary to make it up to five especially if the fitting is loose. Once done, apply some Teflon pipe joint compound around the tape. Remove or wipe away the extra compound before you reconnect or reattach the joints.
How about compression joints? What are these joints for, and how do you stop it from leaking?
Compression joints are intended to connect shutoff valves, although they can be used for other plumbing connection purposes. These joints are usually joined together by way of pressure.
To start your leak-free connections with compression joints, get a Teflon pipe joint compound. Use the compound to lubricate the ferrule—a plastic or metal ring that is part of a compression fitting—and the pipe itself, so the ring slides down and forms a tight seal.
Once done, get yourself a pair of wrenches and crimp the ferrule to ensure a tight compression fitting. Make sure that the pipe goes straight into the fitting so it does not cause leaks.
In case leaks happen even after the adjustments you’ve made, you can try to tighten the nut an extra quarter turn.
Slip joints, on the other hand, are mechanical joints used to allow pipes joined together to move usually in a linear direction.
To make sure it does not cause leaks, lubricate your slip joint and drain the tubing. Using your hand, attach the slip nut to the slip joint. Make sure they are attached tightly so they remain firmly in place for drainage. Misalignment can also cause leaks, so make sure you do it accurately.
- The New Trenchless Plumbing Technique in Kuala Lumpur
- Types of Pipe Corrosion Found in a Kuala Lumpur Home
Prevention is always better than cure. The same adage can be applied to your pipe joints. Don’t wait for your pipe joints to leak. Practice preventive measures for each type of pipe joint you have like the one we have mentioned above.
But of course, if things get out of hand, it’s always better to call for a plumbing expert and get the matter done. Sometimes, a few DIY fixes can cause more trouble and cost you more than you expected.
There are many plumbing experts you can call for help in Kuala Lumpur and it’s only a matter of choosing wisely.