The trenchless plumbing technique or more commonly known as trenchless technology is a new way of repairing and replacing water line pipes. Contrary to the traditional way of working with pipes, the trenchless method is a rather efficient method as it causes minimal disruption to surface activities as opposed to open trenching. Our plumbing experts in KL can offer more information on this.
Table of Contents
Uses of Trenchless Technology in Residential Plumbing in Kuala Lumpur
Technically known as Cured In Place Pipe (CIPP), this trenchless plumbing technique lets you repair a pipe without having to remove any sections of it. To repair the damage, there is no need for the pipe to be completely replaced but will focus only on the affected section. In this method, a pipelining is sent inside an old pipe where hydraulics is used to guide the lining into the leaking area. A new pipe interior is then created as the lining is sealed onto the damaged pipe interior, therefore, fixing the leaks.
This method is primarily used in replacing sewer or water lines. Pipe bursting simplifies the task of putting a new buried pipeline. In this method, a hole is dug from the property line to the end of the pipe that needs replacement. From inside your home, a full-length replacement pipe is then slid into the damaged pipe. A piece of hydraulic equipment is used to successfully set the new pipe inside the old pipe. Then, this is where a pipe burster is used. This device is pulled through the pipe causing the new pipe to expand and the old one to shatter. In this simple method, a brand new pipe is attached to the municipal system, and the hole completely filled in.
New installation is another useful trenchless technique for residential plumbing as homeowners no longer need to completely have a new installation of a sewer line or water main. In this method, the new pipe material is pulled using mini-horizontal directional drilling which passes through a hole dug laterally in the ground.
Advantages of Trenchless Plumbing Technique in KL
Trenchless technology is far more advantageous than the traditional method. Below are some of the reasons why you should opt for trenchless plumbing.
Trenchless technology is affordable and cost-effective.
Compared to the traditional method, a few plumbers are needed in performing trenchless plumbing which can be completed in just a day or two. This way, homeowners will only have to pay less amount of hourly rates to plumbers. Trenchless plumbing also doesn’t need you to make changes in terms of the structure of your house in order to access the broken pipes. This way, you are able to save on material costs.
Trenchless technology requires minimum efforts.
The whole yard doesn’t need to be dug in performing trenchless plumbing in order to access the water line. Instead, two small holes will do to successfully make necessary repairs.
Trenchless technology ensures quality repair and durability of pipes.
The trenchless method uses epoxy treated materials that makes the pipes stay in good condition, with water flow supported smoothly. These pipes don’t rust easily that causes further damage, making it last for even half a century.
Trenchless technology is environment friendly.
The trenchless technology is even better than the traditional method because it does not harm the environment. This time, plants and trees don’t need to be uprooted just to locate the broken pipes as opposed to the traditional method.
Trenchless technology can be used in many applications.
Trenchless technology makes it easier to address any of your pipe issues as it can be used to repair almost any kind of water line damage.
We have paved the way of addressing several pipe issues, including water leaks, broken pipes, corroded pipes, etc. through the use of trenchless plumbing techniques. This trenchless technology made it easier to replace and repair pipes without causing ecological damage as opposed to the traditional methods where a hole must be dug causing the trees to be uprooted without any choice. Sometimes, these replacement jobs are just too massive for a trenchless technique to manage. This mostly happens with pipes that are too old. By using trenchless technology, it can help you manage these issues before they become too troublesome.