Plumbing is a complex and sensitive system that demands careful handling and attention.

A plumbing inspection will typically reveal plumbing problems that need to be fixed for the plumbing system to function properly, some of which may not have been visible before the inspection.

Issues can range from clogged gutters or broken pipe joints to leaky faucets and faulty water heaters, so it’s important to make sure you hire a qualified plumbing contractor who has experience with plumbing inspections.

In this article, we will discuss the most common things found during these inspections, so read on below to know more!

Defective and Old Piping

one of the most common plumbing problems found during inspection is defective or old piping. The pipes may not be able to sustain the necessary water pressures and they can burst, leak, and corrode over time.

This problem could also lead to sewage leakage, which will make your plumbing smell bad because of waste material that doesn’t get filtered out by plumbing equipment in homes with septic tanks.

The solution for this issue would be replacing the damaged parts of the system immediately before plumbing issues worsen, usually through a more expensive process like digging up dirt from below the ground level

Some replacement options are copper pipe-which is popular these days-or PVC piping, which has a better resistance against corrosion than plastic.

Blocked Sewer Lines 

Another plumbing problem that is often found during plumbing inspections is blocked sewer lines, which can be caused by a number of factors including sediment buildup or tree roots.

This problem will need to be taken care of immediately so the blockage doesn’t get worse and cause sewage backup into your home-some people may not notice this happening because they don’t have plumbing problems in their homes very frequently.

The solution includes opening up the drain line from below ground level and clearing it out with power tools like dump trucks or root cutters, as well as installing backflow prevention valves for added safety measures.

Some other solutions include using a wire cable auger–an electric device used to clean pipes–or hiring professional assistance from experts who specialize in cleaning out blocked sewer lines.

Leaking From Plumbing Pipes 

Leaks from plumbing pipes are another common plumbing issue discovered during plumbing inspections, which can result in water damage and other issues.

This issue could be caused by old piping or corroded joints-depending on the type of leak–but it will need to be addressed before things get worse and more serious.

For this particular plumbing problem, a simple solution would be tightening up loose fittings with screwdrivers or wrenches.

If there’s still leaking after doing that, then replacement parts should also be used so you don’t have to do maintenance work later down the road because they’re too damaged for repair.

If the pipe isn’t near any walls or ceilings, then one option may include wrapping them in insulation like foam sheets of fiberglass for added protection.

This plumbing problem will need to be addressed by a plumbing contractor, so make sure you hire one who has experience with it!

Water Heater Issues 

Our water heaters are among the things that give us comfort, but they can also give us plumbing problems.

Issues with water heaters are often found during plumbing inspections because they have a high probability of breaking down or leaking, which will make your plumbing smell bad and cause all sorts of other plumbing issues to arise like mold growth in humid environments where you live.

The solution for this issue is replacing the broken parts immediately so they don’t get worse-or repair them if possible–and then cleaning up any water that has leaked onto things nearby before doing anything else.

This should be done by installing new seals on top of valves and tightening loose fittings below dishwasher connections, as well as repairing the heater’s cooling coils when needed; many experts recommend getting help from someone who specializes in heating repairs to do this kind of task efficiently.

Slow Draining Sinks and Toilets 

Another plumbing issue that is often found during plumbing inspections is slow-draining sinks and toilets.

This problem will need to be taken care of immediately so the blockage doesn’t get worse and cause sewage backup into your home, which can result in other plumbing problems like a foul smell or mold growth.

The solution for this includes pouring a lot of boiling water down your sink or toilet to break the blockage and help it drain.

You may also use baking soda and vinegar, which many homeowners use when this plumbing problem arises, to break the blockage and clean your pipes, but be sure you don’t use them all at once because they can cause a chemical reaction that creates toxic fumes.


Plumbing can be a tricky business, and when it comes to the health of your home or business’s plumbing system, you want to make sure that everything is up-to-code.

To help keep your property safe from potential problems in this area, we recommend scheduling an annual plumbing inspection with our team!

We offer thorough inspections that will identify any problem areas so they don’t turn into major issues later on down the line.

If you have questions about what we do or how we work, feel free to reach out anytime for more information—we are happy to answer all of them!